 
About the Tile & Grout Cleaner
- Powerful foaming spray clings to hard, wet surfaces to dissolve
stubborn stains, dirt rings, grime and soap film
- Non-abrasive formula will not scratch
- Convenient spray valve sprays in all directions, even upside down
for hard-to-reach places
Where To Use
the Tile & Grout Cleaner
- Use on bathtubs, shower stalls and sinks
- Use on ceramic tile, porcelain, baked enamel, fiberglass, chrome
and stainless steel
- Use on vinyl shower curtains, rubber bath mats, plastic garbage
and diaper pails
- Test first, as product may bleach color pigments from colored grout
- If used on marble, spray on and immediately wipe off before it dries
- No harsh chlorine fumes.
How To Use
the Tile & Grout Cleaner
- Shake well.
- Hold can 6 to 8 inches from surface and spray. Can will spray
when held in any position.
- Scrub with the Bathtub Swab or the long-handled
Tub and Shower E-Z Scrubber, removing dirt
and stains
- Rinse with sponge or Microfiber Cleaning Cloth.
Cleaning Shower Door Tracks: Clean shower door tracks
with the Tile & Grout Cleaner and Shower Track & Grout Brush (#
293) which fits into the grooves. Spray on the cleaner and
give it time to start breaking up the grime. Scrub with the brush
in a back and forth motion until the dirt and grime is loosened.
Rinse well and wipe dry. Spray with a disinfectant to prevent mildew
growth.
Read:
Bathroom Mold & Mildew
- Net Wt: 20 oz.
- Product Type: Aerosol Spray
- MPN:/Model: 602
- GTIN:/UPC:
083701006021
- Tax according to your local sales tax code
- Shipping by Fedex: $7.95-per-total-order, including Stanley Products, continental USA. * Shipping rebate offer.
- No phosphates, chlorofluorocarbons or abrasives.
- Safe for septic systems when used as directed
- Recyclable steel container
|
See Tile & Grout
Brush
|
